Trinnløs Pumpe


Kun 1 på lager

Kategori: Stikkord: ,


Har to av disse selv. Børsteløse og trinnløs regulerng av flow. Egnet til all mulig pumping. Hos meg brukes de til motstrømskjøler og sirkulering under mesking.

Trenger 12V min 4A strømforsyning.

DC50C-1240A DC 12V Brushless Speed Adjustable Oil Water Pump 2150L/H 4M/13ft


Speed adjustable by PWM, 0-5V analog signals and potentiometer
Max operating temperature up to 100°C/212F with external circuit board
Horizontal inlet and outlet with rotatable cap, easy installation
The axis is enclosed with static sealing which can avoid leaking problems
It employs high performance and durable ceramic shaft
Brushless, permanent magnetic rotor, maintenance-free, long life
Submersible installation and entirely waterproof
High efficiency, low consumption, low noise

Model: DC50C-1240A
Material: PA66+GF30%
Power consumption: 45.6W
Rated voltage: 12V
Rated current: 3.8A
Max flow rate: 35.8L/MIN
Max static head: 4m (13.1ft)
Diameter of inlet: 20mm ?1/2 inch thread)
Diameter of outlet: 20mm ?1/2 inch thread)
Noise: <40dB
Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic, 3-phase
Max working temperature: 100°C/212F
Item dimension: 100.5*84.5*64mm
SKU: X1HG10025

1. Working at rated voltage (DC12V/3.8A ). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.



Vekt 0.592 kg
Dimensjoner 14 × 12 × 6.5 cm